Jack Table

SUITED TO THE CONSTRUCTION OF SMALL TRUSSES: JACKS, SADDLES, CREEPERS

REQUEST MORE INFORMATION
Features

QUICK AND NIMBLE PLATEN PRESS

  • Quick and nimble platen press.
  • Fully integrated safety light curtains.
  • 50T pressing capacity.
Play Icon

Jack Table Overview Video

SPECIFICATIONS

The MiTek Jack Table is a quick and nimble platen press ideally suited to the construction of small trusses: jacks saddles, creepers, etc.
The Unistrut rails matched with a HDPE plastic top provides a quality working surface that accommodates tooling for larger trusses.

PHYSICAL DATA
Available sizes•1.8m (6ft) x 7.3m (24ft).
•1.8m (6ft) x 9.1m (30ft).
• High speed travel of press head with ramped acceleration.
• Simple controls.
• Pressing capacity of 50T, depth limited to prevent crushing of timber.
• Platen width of 305mm.
• Auto-raising of platen.
• Light curtain protection 600mm either side of the press head.
• 5kW hydraulic motor
Installation Data
Power Supply415V, 3 phase power, 11.4 Amps (20A CB, 3 Core + Earth)
  • Table Top – A choice of table tops include:
  • – Unistrut at 457mm centres with plastic infill
  • – Plain Top (Plastic)
  • Dual Control – with this option installed the press may be controlled by operators on either side of the press.
  • Unistrut tooling – talk to us about your tooling needs..

DOWNLOAD THE FULL SPEC SHEET

DOWNLOAD PDF