![](https://miteknz.co.nz/wp-content/uploads/2021/06/Hero-Banner.png)
LUMBERLOK TIMBER CONNECTORS
Angle Brace
Angle Brace may be used as either compression or tension brace. Nail holes are fully punched for ease of nailing. Fix with 75mm x 3.15mm diameter F.H. nails.
When used as a diagonal wall brace, it should be secured at each end with three nails, and two nails at each stud crossing.
Standard length is 3.6m, other sizes available on request (2.7m - 5.0m). Angle Brace can be used as an anti-sag mechanism for purlins or girts.
Materials: 0.85mm G250 Z275 Steel
Finish: Zinc Coated
Resources
ServicesInstallation
- As mentioned above.
Need Help or Have a Question? Contact Customer Service
![Angle Brace 30](https://miteknz.co.nz/wp-content/uploads/2021/06/Angle-Brace.png?w=300)
![Angle Brace 30](https://miteknz.co.nz/wp-content/uploads/2021/06/Angle-Brace.png)
![Angle Brace 33](https://miteknz.co.nz/wp-content/uploads/2021/06/Angle-Brace-33.png)
![Angle Brace 36](https://miteknz.co.nz/wp-content/uploads/2021/06/Angle-Brace-36.png)