Jack Table
SUITED TO THE CONSTRUCTION OF SMALL TRUSSES: JACKS, SADDLES, CREEPERS
Features
QUICK AND NIMBLE PLATEN PRESS
- Quick and nimble platen press.
- Fully integrated safety light curtains.
- 50T pressing capacity.
Jack Table Overview Video
SPECIFICATIONS
The MiTek Jack Table is a quick and nimble platen press ideally suited to the construction of small trusses: jacks saddles, creepers, etc.
The Unistrut rails matched with a HDPE plastic top provides a quality working surface that accommodates tooling for larger trusses.
PHYSICAL DATA
| Available sizes | •1.8m (6ft) x 7.3m (24ft). •1.8m (6ft) x 9.1m (30ft). • High speed travel of press head with ramped acceleration. • Simple controls. • Pressing capacity of 50T, depth limited to prevent crushing of timber. • Platen width of 305mm. • Auto-raising of platen. • Light curtain protection 600mm either side of the press head. • 5kW hydraulic motor |
Installation Data
| Power Supply | 415V, 3 phase power, 11.4 Amps (20A CB, 3 Core + Earth) |
Table Top – A choice of table tops include:
– Unistrut at 457mm centres with plastic infill
– Plain Top (Plastic)
Dual Control – with this option installed the press may be controlled by operators on either side of the press.
Unistrut tooling – talk to us about your tooling needs.
